Currently Supported Scales

Below is a list of scales that are currently supported by the OG Harvest System. 

If your scale is not in this list, there is a very good chance we can add support to it. Please contact support@outlawtechnology to inquire.

Make	Model	Interface	Additional Configuration
Ohaus	Defender 3000	RS232	Menu -> Print submenu -> Content submenu turn all option on
Ohaus	Defender 5000	RS232	None
A & D	EK-EK15L	Special RS232. See Note 1	None
Ohaus	Ranger 7000	RS232 or USB	None
Ohaus	Ranger 4000	RS232	None
Ohaus	Ranger 3000	RS232	MAY have to manually put scale in "Continuous print mode" Enter menu Scroll to "Print" menu Scroll to "Auto Print" Set it as "Continuous"
Ohaus	Adventurer	RS232 or USB	None
Ohaus	Explorer	RS232	None
Transcell	TI 500 RF	RS232 with Null Modem adapter	Menu options: A1/C1 = 9600 A2/C2 = 8_n_1 A3/C3 = 4 A6/C6 = 0
Rice Lake	Synergy680 Plus	RS232	Menu options: Serial RS232 Input = CMD Baud = 9600 Bits = 8None stopbit = 1 ternin = CR/LF eoldly = 0 echo = off response = on handshake = off address = 0
Torbal	Fulcrum BA15-	RS232	None
A & D	HV-60KV-WP	RS232	F5 = 1 F11 = 00
Torbal	BA Model	RS232 with Null Modem adapter	None

Note 1 - A&D scales require a special A&D cable. Outlaw technology will procure this for you.